Saturday, February 20, 2016

Top 3 our places with a huge amount of the ceiling fans!

Before you read this, you must check my Youtube channel here.

Based on my Youtube channel, here is our top 3 places with a huge amount of the ceiling fans. Even this is not too much like one of my friends who did same thing too (recording ceiling fans), but nevermind. For who don't know where I live, I live at Tulungagung, the city with a well-known as a marble art and crafts in East Java. Although there is only one that shows the pictures and videos of that, but it's okay, too. Here we go! Started with the lower, to the highest.

#3 KDK and Panasonic orbit ceiling fans, at a textile store

These fans are located at a textile restaurant, called "Wijaya", which is located at a Jln. Teuku Umar. There are 13 orbit fans in total. Actually, the Panasonic are the newer fans installed in there, and the KDKs are the old fans (were installed while the building was opened for the first time. However, from what I'd remember, one of the KDKs has unoriginal blades, which is red, because unknown. By the way, this is only the store that has huge amount of the ceiling fans, even in my "12 various of orbit fans at a shop" video almost reached this top 3.

#2 Uchida Milenium industrial ceiling fans, at a grilled chicken restaurant

These fans are located at a restaurant called "Ayam Bakar Bu Mamik", which is located at a Jln. Jaksa Agung Suprapto, just next to the shoe store that had a pair of 48" Alaska/Maspion industrial ceiling fans. There are 18 (probably), and 8 of them were installed in the hall of the restaurant, and the others were installed on the restaurant part. 

#1 Panasonic and National industrial ceiling fans, at an electronic store
So far, and so far, this is only place that has a LOT amount of the ceiling fans, and with a neat installation. These fans are located at an electronic store, called "Samodra", located at Jln. Basuki Rahmat. However, this place was the former of the bookstore, but it was switched places...

There are 26 of them, and they're branded National. Most of them the model of these fans are F-EY149-2s (PT. National Gobel made), and the rest are F-560A1s (a Japanese made, Matsushita). However, one of them has been replaced by a Panasonic industrial, model F-EY153. There are 3 columns of them, The first one contains 9 fans, the second one (which shown in this picture above) contains 11 fans, and the last column only contains 5 fans. Also, there is one more fan installed outside the store. Each column has a different models as well, the first column contains 4 F-EY149-2s, and 5 F-560A1s, the second column contains 1 F-EY153, 5 F-EY149-2s, and 5 F-560A1, and the last column contains 3 F-EY149-2s, and 2 F-560A1s.

Here are some other pictures of it:
The fans on the last column, at the back part
One of the F-560A1 on the first column
A Panasonic F-EY153 replaced one of the Nationals
A National F-EY149-2 installed outside (notice the KDK canopies)

Friday, February 19, 2016

My Plants vs. Zombies collection




For reason why I collect these things, click here. For non-Plants vs. Zombies collection, click here. Also, be sure to check the final results from them too.


Hi guys! Do you know if I'm a Plants vs. Zombies lover? Of course, if you familiar with this video game, you will say yes to us. Since I love the game since the first game to now (which are some sequels and Garden Warfare variants), I decided to collect the toys from this game as much as possible. Speaking about my previous post, called "This is what happens if the KFC provided PvZ toys...", here is a deep review of my Plants vs. Zombies toy collection. I collect some of them as much as possible, and it's kind of cool collection.

Since there are lot more of these Plants vs. Zombies toys that will be come into my collection, I will only put at least 3 to 5 toy sets in each of the parts, so this was the first part, and the next parts will be a different Plants vs. Zombies toys, not a same one (except for the cameo for the next parts). Anyway, let's check this!

Here are several of my Plants vs. Zombies toys (except for some of them that are shown on several of my pictures):


1. KFC Plants vs. Zombies, Cabbage-pult*


Cabbage-pult in my collection (along with Angry Birds and Pokemon)
This is a very first Plants vs. Zombies figure that I ever collected. According to the previous post that featured this toy figure, this toy actually isn't original to my collection. This is because this toy is came from my old friend, while I still on the kindergarten. I like this style alot, however there is a weakness for this toy figure. If you play it alot, the eyebrows on this toy is almost vanished, not sure why. I tried to fill the vanished eyebrows with a green marker, but it doesn't work. Sadly, from what I said in the previous post about this toy, this toy was destroyed by the original owner.

Here is a little info about this toy: If you want to play it, press the stem to throw the projectile.
* not original for my collection

2. Unknown bootleg Ancient Egypt figure set

Ancient Egypt figure set (Note: only 4 of the 10 figures were shown)
Well, after the KFC Plants vs. Zombies Cabbage-pult toy is gone, and there is a Peashooter speaker (shown at the background of this picture), I just bought these bootleg Plants vs. Zombies figures. There are 10 of them, such as Cabbage-pult, Bloomerang, Iceberg Lettuce, Grave Buster, Bonk Choy, Mummy Zombie, Buckethead Mummy, Ra Zombie, Explorer Zombie, and Pharaoh Zombie. I don't like several of them, except for the Cabbage-pult, Bloomerang, and the Iceberg Lettuce. Although these figures are ugly-styled, apparently these figures supposedly to last longer without any problems like KFC Plants vs. Zombies Cabbage-pult did.
Advantages: Does last longer compared to the other toy brands that was literally made in China. Disadvantages:
  • The style on this set is always ugly and poor, as the other unknown bootleg Plants vs. Zombies sets too.
  • Since this set is ugly, they also have a bad moulding as well.
  • No articulation.

3. KFC Plants vs. Zombies 2


KFC Plants vs. Zombies 2, complete set
As what I wished on KFC's Facebook, finally these franchises are came back again, but in different style. It was released back around September to October 2014, after I bought the 10 Ancient Egypt figures. These are Bonk Choy, Snapdragon, Wall-nut, and a Basic Zombie.  I like them, especially the style of the Bonk Choy, and a performance of the Basic Zombie. Here is the info about these toy figures:
  • Bonk Choy: If you move it forward and backward, the arms are moving, like the Sunflower.
  • Snapdragon: Just like Peashooter on Pumpkin, except you must face it downwards, and push his head to shoot the fire projectile.
  • Wall-nut: Acts like top spinner, however it seems a bit harder than these generic top spinner toys.
  • Zombie: Spin the lever, and it walks like in the game.
Advantages:
In my opinion, the Zombie figure was the best toy in this set.
Disadvantages:
  • Less articulation.
  • The Snapdragon is the most worst toy, because it didn't shoot very well.

4. K'NEX Plants vs. Zombies, Series 2


K'NEX Plants vs. Zombies, Series 2 (only 3 of the 8 figures were shown,
and notice if the Snow Pea's stem isn't original)
It's a been a year later I didn't collect any Plants vs. Zombies figures, but finally, I just bought these rare figures that I found from e-Bay, K'NEX Plants vs. Zombies, Series 2. It's supposedly to be a common figures in US, but I actually can bought them for a big bucks. There are 8 figures to collect for the each blind bag, and fortunately, I just bought a complete set of it. These are Cabbage-pult, Translucent Bonk Choy, Infi-nut, Snow Pea, Frozen Zombie, Pirate Zombie, Conehead Mummy, and a Prospector Zombie. I like the design of them, especially the Snow Pea. Unfortunately, the stem of the Snow Pea is missing, because unknown, and the bag that packed it was stapled. Here is the info about them (plants only):
  • Cabbage-pult: Pull or flick the catapult to throw the projectiles
  • Bonk Choy: Just like the one from first series (only the different color), you can spin the arms
  • Infi-nut: Flick whole of the toy
  • Snow Pea: Like Peashooter from the Series 1, you must pull the ice trigger on the back to shoot the frozen peas.
Advantages:
  • There was a secret code on each of the blind bags. Since I know these codes that contains these figures from Youtube, I did figure them out which figures you can get.
  • The Cabbage-pult looks pretty decent, compared to the one from Unknown bootleg Ancient Egypt figure set.
  • It has a "Approved for fun by PopCap" logo, which means this set is official, so don't bother.
Disadvantages:
  • Despite it was made from a proper material, the quality seems cheapos, especially the plants. If you play it alot, it would left some kind of the dirt that can't be cleaned by anything which is not good thing.
  • The projectiles are easy to lost, due to how small they are.
  • For the Snow Pea, sometimes it doesn't shoot very well (the projectile still inside the shooter).

5. K'NEX Plants vs. Zombies, Series 1

Even though I got a complete set of the Series 2, I just bought the older ones too, which is Series 1. I only got 2 figures as for now. These are Sunflower and Bloomerang. So, here are two toys:

a. Sunflower

K'NEX Plants vs. Zombies Series 1 Sunflower
Here is my first K'NEX Series 1 figure. After several months I didn't buy any of these toys, finally I just bought this toy. I bought this from eBay. For some reason why I got the Sunflower, because two reasons: 
  1. The first reason is because I originally wanted the Peashooter, but sadly it was sold out. Luckily, I got this as this toy was the last item listed on eBay. Even there is a Bloomerang one (the rarest figure in that series, or known as Elite), I choose this because it's the cheaper one.
  2. The other reason is because my collection is too bad without this toy, as the Sunflowers are main plants in the game.
The good thing about this series is it was included the K'nex blocks as the base of this toy. And one more thing, if you want to play this toy, just shake it's face with your finger.

Advantages:
  • Since this was K'NEX's first Plants vs. Zombies series, it has several K'NEX blocks for build the base ramp.
  • It has a secret code on its blind bag, as this was the older series, and also it's a very first series of K'NEX Plants vs. Zombies blind bag line.
  • It has a "Approved for fun by PopCap" logo, which means this figure is official, so don't bother.
Disadvantages:
  • It has the same seizure like Series 2, material seems cheapos despite it was made from a proper material, and the projectiles are easy to lost due to how small it is. Also, the stem on this figure is probably the worst part, every I bend it, the color of the stem changed into white, which is annoying.
  • The connection between base and the toy itself is loose.

b. Bloomerang

K'NEX Plants vs. Zombies Series 1, Bloomerang
It's finally here! The rarest plant figure in this series has been arrived in my collection. I also bought this from eBay too, even the price is still same as the Sunflower one, for around 35 bucks. Only one reason why I bought this one, because it's only other Series 1 figure that still sold through eBay in that time, so I had a chance to get it. I liked the performance, and the style of this toy. If you want to play it, just flick the boomerang projectile. Also, you can spin the petals if there is no projectile loaded in there.
Advantages:
  • Since this was K'NEX's first Plants vs. Zombies series, it has several K'NEX blocks for build the base ramp.
  • It has a secret code on its blind bag, as this was the older series, and also it's a very first series of K'NEX Plants vs. Zombies blind bag line.
  • It looks pretty decent compared to the one from Unknown bootleg Ancient Egypt figure set.
  • It has a "Approved for fun by PopCap" logo, which means this figure is official, so don't bother.
Disadvantages:
  • The connection between base and toy itself is loose, just a tiny bit more than the Sunflower.
  • It's petals are loose, so that's why I tried to flick the projectile slightly powerful and I miss, the petals come off when I just hit the petals.

Specifications:

a. KFC Plants vs. Zombies, Cabbage-pult*
Original product name: KFC Plants vs. Zombies
Total of the complete set: 4
Material: ABS, plastic, PVC
Year: 2013
Factory: China
Popularity: Common, but now is very rare
Company/Importer: KFC, Dufia Toys (probably)
Purchased from: KFC (May 2013)*
Quality: Good
Type: Mechanic figure
Bootleg: Unknown 
Delay of delivery: Not available, since it was purchased directly from the place where the toys provided by 
Packed in: Transparent bags for each toys  
* Even this is not original to my collection
b. Unknown bootleg Ancient Egypt figure set
Original product name: PVZ 2 Mummy Set (probably)
Total of the complete set: 10
Material: PVC
Year: 2013
Factory: China
Popularity: Uncommon, but it's very common in online stores
Company/Importer: Unknown
Purchased from: Lagoric (a kind of a local blogspot of the local online toy shop)
Quality: Average (but it seems bad to me)
Type: Static figure
Bootleg: Yes 
Delay of delivery: A week (probably)
Packed in: Generic transparent plastic bag, with 10 figures inside their own small bags (originally)
c. KFC Plants vs. Zombies 2
Original product name: KFC Plants vs. Zombies 2
Total of the complete set: 4
Material: Plastic, PVC, ABS
Year: 2014
Factory: China
Popularity: Common, but now is very rare
Company/Importer: KFC, Dufia Toys
Purchased from: KFC (September 2014)
Quality: Good
Type: Mechanic figure
Bootleg: Unknown 
Delay of delivery: Not available, since it was purchased directly from the place where the toys provided by
Packed in: Transparent bags for each toys
d. K'NEX Plants vs Zombies, both Series 1 & 2
Original product name: PvZ Mystery Bags, Series 1 #53437, Series 2 #53007
Total of the complete set: 8 (for each series)
Material: Resin, plastic
Year: 2014
Factory: China (figure), USA (blocks for Series 1)
Popularity: Insanely rare (very common in USA)
Company/Importer: K'NEX
Purchased from: eBay
Quality: Cheap, but not too cheap as these bootlegs (figures), Good (blocks for Series 1)
Type: Building toys
Bootleg: No 
Delay of delivery: About a month (or even two months)
Packed in: Blind bags for each figures

Watermarks (Except for KFC Plants vs. Zombies, Cabbage-pult):

a. Unknown bootleg Ancient Egypt Figure set
Nothing.
b. KFC Plants vs. Zombies 2
(C) 2014 Electronic Arts Inc.
PopCap is a trademark of Electronic Arts Inc.
(KFC logo, EA logo, and PopCap logo)
c. K'NEX Plants vs Zombies, both Series 1 & 2
(CE logo)
Made in China
2014 (C) K'NEX LPG
(for zombies, they have a K'NEX logo on one of their parts)

Galleries:

K'NEX Plants vs. Zombies Series 1 blind bag (before opening)

Another K'NEX Plants vs. Zombies Series 1 blind bag, before opening

2 of the K'NEX Plants vs. Zombies Series 2 blind bags (before opening), notice the left one is stapled, that's the one that contains the infamous Snow Pea
2 of the K'NEX Plants vs. Zombies Series 2 figures, after opening for first glance
A KFC Plants vs. Zombies Cabbage-pult toy sat on my Peashooter mini speaker

All of my Plants vs. Zombies collection on my desk
All of my Plants vs. Zombies collection on my bed, without the zombie
Having fun with Angry Birds...
Inside of the K'NEX Plants vs. Zombies Series 1 Sunflower's face
The other 6 K'NEX Plants vs. Zombies figures series 2 blind bags
All of my Plants vs. Zombies collection, before several of the K'NEX versions of it came...

The other side about my Plants vs Zombies collection on my desk

This is where I keep some of my K'NEX projectiles... (not including those pen connectors)
Homemade stems for my Snow Pea... Unfortunately, the left one broke down and I recently using the one on the right






All of the K'NEX projectiles (from the left: Sunflower, Bloomerang, Cabbage-pult and Snow Pea)
Some of my K'NEX Plants vs. Zombies figures taken apart... Notice if 2 of them has a dark color on their body, one of them has paint damage, and the Snow Pea has no original stem found...
A closer look of a base ramp (K'NEX Plants vs. Zombies, Series 1, Sunflower)
Instructions for both K'NEX Plants vs. Zombies Series 1 and 2
All of my K'NEX Plants vs. Zombies toys in this part, just how to shoot or flick projectiles from these figures with their triggers
"Approved for fun by PopCap" logo

Videos:

There is a little bonus clip on one of these videos below (after the main clip for the toy itself):
Skip to the bonus clip which contains these toys for videos below here (due to main clip of these videos here are supposed for my main thing, electric fans):
This is where I began collecting these things by inspiring this commercial video:

My mini ceiling fan collection

Alright, another post on my blog! This time I'll show you all of my mini ceiling fan collection from our childhood to now. Just let you know, if this hobby isn't popular yet.

Here is a little info about mini ceiling fan:

Mini ceiling fan is a type of the fan that uses a synchronous motor, so it doesn't work with a dimmer, or a regulator. Originally, the mini ceiling fans were always made in China with frequency about 220v 50Hz, and also there were 110v version of them.

Here we go! Started with the oldest one to now.

1. Unknown (probably Viar or HTC) oldie-type mini ceiling fan

Unknown oldie-type mini ceiling fan

This is my very first mini ceiling fan, even this is originally not mine. Originally, this is came from my cousin that now lived in his own house as for now. Before it broke, this fan runs fine, however this fan only lasted for around 7 years (probably). After this fan broke off, he replaced with a Shukaku mini ceiling fan. Then, I took this from his house, even this fan isn't working anymore to my mini ceiling fan collection, and I hung it as the ornament only (as for now).

2. Pair of Elitesat mini ceiling fans
One of the Elitesat mini ceiling fan, notice the blades isn't original
These are one of the first mini ceiling fans that I bought back in 2009, while in my old house. Each fans has cost around IDR 20.000. I installed them in my living room of my old house. These fans runs fine, and blow decent amount of air. Then, some months later, I moved them to the bedroom (formerly that's my bedroom) of my old house. Unfortunately, after I took them down, I lost one of them, and the other one (that shown in pictures above here) survived. But, the one that survived has the blades broke off. Then, back in 2014, I just put this fan in my collection (along with my Sivicom), and I changed the blades of them with a better one, even the motor is a little bit inhibited.

3. Extend mini ceiling fan

Along with these Elitesat mini ceiling fans, this fan was also bought in 2009. It cost IDR 35.000. It's also the first mini ceiling fan with a bigger diameter. It works fine, however, the blades are cheaply made so that's why it broke off so badly, and it didn't last longer as the Elitesats. Sadly, in 2014, this fan was trashed, so I wasn't able to rescue it.


4. MEET mini ceiling fan

I'm not joking about this fan's brand. After 4 years later I didn't collect any mini ceiling fans, I just bought this fan with cost about IDR 20.000. This fan works, however, there is a problem for this fan. When turned on, sometimes it acts like this fan inhibited like this: startup-on-startup-on. At least, this fan blow good amount of air. Unfortunately, after some months later, one of this fan's blades was broke. For some reason I didn't rescue this fan. Instead of it, I just destroyed it with a hammer and the fire, and saved one of the blades.

5. Sivicom mini ceiling fan
Sivicom mini ceiling fan
Along with my MEET mini fan, I just bought this fan, with cost about IDR 18.000. This fan is most cheapest mini ceiling fan, among with the other ones that I have. This fan runs pretty well, even it has some buzzing noise.

6. Pair of Bright-G mini ceiling fans, in different models

Bright-G mini ceiling fans in different models

Well, after 2 years later I didn't collect any mini ceiling fans anymore, I just bought a pair of the Bright-Gs, even in different model. The first fan's model is BG-500, and the other one is FD-50-10E.  The first fan costs about IDR 30.000, and the other one costs about IDR 25.500. Both fans works pretty well, even the second fan wobbles a bit.

7. Niga mini ceiling fan

Niga mini ceiling fan
After some months later, exactly near the end of the year 2015, I just bought this fan, and it cost about IDR 30.000. This fan works well, however it's a bit wobbly.

8. GMC mini ceiling fan
GMC mini ceiling fan
Last but not at least is a GMC. After a new year 2016, I just bought this old-style mini ceiling fan. It cost about IDR 20.000. It works pretty well, and it's very quiet for an old-styled mini ceiling fan.

At least, these fans are the fans that I collect, with an exception for the Extend, one of the Elitesats, and a MEET mini fan.

Sunday, February 14, 2016

This is what happens if the KFC provided PvZ toys...

For a further information of my actual Plants vs. Zombies collection (as well the origins of it)click here.

Hello everyone, This is our actual first post, as well my first Plants vs. Zombies collectibe explanation thing. This time I'll show you what happens if the KFC provided my favorite game, Plants vs. Zombies (on my story). However, the one that I research here is the ones from May 2013. Even it was discontinued forever, I still wanted to get them as the toys looks neat though, even these toys became scarce, and I didn't find it out yet.

Here is the picture of the ones that I meant here:
KFC Plants vs. Zombies
Here is a commercial video of these toys look like (the user isn't original due to Vimeo got blocked by government, for unknown reason)


Okay, here is my story of this blog before I found this commercial to this time.

Before I saw the KFC Plants vs. Zombies commercial, I thought the KFC toys are look ugly and silly in my opinion. The first time I saw that commercial, back in 8th May of 2013 (if I'm not mistaken). I was asked to my parents about this commercial, but my parents didn't know that commercial. After 2 weeks later, the commercial was gone and replaced by a Man Of Steel, which makes me sad...

Well, after I moved from my old house to my new house, I just forgot to remember these toys, because I'm fan of this game. Then, after my house installed the hotspot, I just checked it online about my favorite game as well. 

The keyword that I always find to now, in Google or anywhere, which always "kfc plants vs zombies". I wanted to get them, but unfortunately, none of the users that sold these toys. This made me sad, a bit. Then, I typed the keyword "jual mainan kfc". None of the users that sold these toys too, except someone who sold KFC toys from different cartoons and games including one of these PvZ toys. After some months later, this user no longer sold that. I also checked it on Google+ on user who got 5 of those, it's initials is "I-T" (I censored it to prevent spoilers). I asked him to get one of his Peashooter on Pumpkin, but he didn't with scarcity reason. I was discouraged about that...

I also find it on Instagram, and there are several pictures of these toys. None of them were sold them, except for the likes as well.

Even I was discouraged, in July of 2014, finally I found 3 of these toys. These are the same thing that I meant here, except the Zombies in Skull... Then, I just borrowed the Cabbage-pult one to review it again in my house...

After 3 weeks later I own this toy, my mom sent it back to the original owner. Too bad, after I borrowed it, the kids destroyed them, which makes me sad again. Then, I just bought some of those "chinese ugly" Ancient Egypt figure set from a someone's online toy store, like this picture:
Ancient Egypt figures
To be honest, I don't like most of these figures, except for the Cabbage-pult, Bloomerang, and the Iceberg Lettuce. But fortunately, KFC just released the second one like this:
KFC Plants vs. Zombies 2



However, I honestly don't like them a little, even the zombie figure looks awesome than the other toys. But, after a year later, I just bought the rare figures from e-Bay that seems to be like this picture:
K'NEX Plants vs. Zombies Series 2
It's a K'nex Plants vs. Zombies Series 2! 

Even I got complete set of it, my favorite one was the Snow Pea. Sadly, the Snow Pea's stem was missing for unknown reason, and the bag that bagged it was stapled. Because of that, I just made the stem made of the ice cream sticks, and the straws. I also wanted to get different set of the K'nex from e-Bay, but I don't have enough money. By the way, I satisfied with this set, even this set's quality is seems cheapos like my old Ancient Egypt figures, especially the attacking plants. If you use it alot, it would left the some kind of dirt on the body. I tried to clean it with any cleaners like floor cleaner, LCD screen cleaner, and also glam (or known as Minyak Kayu Putih) oil, but it doesn't work at all, which made me a bit sad. I did two videos of this set, and here are the links of them:


The first part I unbox it was the Cabbage-pult, then the second one I unbox it was the Snow Pea. In the end of the first part, there is a bonus of the ceiling fan at a drugstore which always belongs to our habit.

After several months later, I also bought another K'nex Plants vs. Zombies figure, which was like this:
K'NEX Plants vs. Zombies, Series 1, Sunflower
Even this is a previous series of it, that got replaced by Series 2, I actually found it for several bucks from eBay. The good thing about this toy which was included the K'NEX blocks to build a ramp to mount this toy on, that made me much appreciated for this brand.

Oh wait! I also got another figure that looks like this below:
K'NEX Plants vs. Zombies, Series 1, Bloomerang
This figure also has the same generation as the Sunflower. Even though I already have one from Ancient Egypt figure set, I like this one more, since it has a cool ability to flick the boomerang projectile. However, I have no idea when I get the regular Peashooter one, since all of the international online shops (like eBay, Amazon, and many more) no longer sold that, sadly...

Here is my video of opening about the Sunflower figure, but you must skip the first clip, due to it's actually one of my experiments about my mini ceiling fans on my channel.

Well, at least here is our story about what happens if KFC provided the neat Plants vs. Zombies toys. Guess what? I ended up got a K'nex one.

Here is the picture while first time I got a Plants vs. Zombies figure toy (KFC Plants vs. Zombies Cabbage-pult):
KFC Plants vs. Zombies Cabbage-pult
And here is my current Plants vs. Zombies figure toys in my collection looks like. Notice the Snow Pea's stem isn't original, and there are some of the figures that isn't shown anywhere in this picture:
My current Plants vs. Zombies collection (Source: my IG)

My Main Page

Hello everyone! I'm Ade Firmansyah. I'm a big fan of the toys, and of course, electric fans. Be sure to check my first blog, which is "This is what happens if KFC provided PvZ toys"

Also, check these of my links:

Youtube: https://www.youtube.com/channel/UCuQqoXqiszo23Qvv4U78zfQ/videos
Facebook: https://www.facebook.com/ade.firmansyah.12139862
Twitter: https://twitter.com/adethefantoyguy


Enjoy!